Kevin - I may be incorrect about this, but you should be able to do your own calibration on the chamber, if you have traceable calibrated temperature and humidity standards with the necessary accuracy.
Regards, Kate Kathy M. MacLean President, APREL Laboratories -EMC-RF Safety-Antenna Design/Test-SAR/MPE-SAR/Near-Field Tools-Acoustics-Wireless- 51 Spectrum Way, Nepean, Ontario K2R 1E6 (613) 820-2730 fax (613) 820-4161 cell (613) 791-3777 Web site: http://www.aprel.com - watch for our new web site coming soon! From: Kevin Harris [mailto:[email protected]] Sent: April 17, 2003 1:51 PM To: EMC-PSTC (E-mail) Subject: Calibration Lab Accredited to 17025 for Temperature and humidity measurements Hello Group, We are in the process of seeking formal accreditation of our in house lab. One of our difficulties is the requirement to get a calibration of our environmental chamber (temperature and humidity) from a calibrating service that is 17025 accredited to make those measurements at a customer location. (i.e. our chamber is not moveable). We have been unable to find a company in Canada with those credentials. Does anybody know of one? Alternatively does anybody know of one in the Eastern US (the closer to Toronto the better :)) ? Thanks Regards, Kevin Harris Approvals Manager Digital Security Controls 3301 Langstaff Road Concord, Ontario CANADA L4K 4L2 Tel: +1 905 760 3000 Ext. 2378 Fax +1 905 760 3020 Email: [email protected] This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
