I read in !emc-pstc that McBurney, Ian [Allen & Heath UK] <[email protected]> wrote (in <BC4E3DA2E1C8164D9CBE2DF1595DCC [email protected]>) about 'Stripline design' on Thu, 29 May 2003: > Does anyone have fabrication drawings for a 150mm Stripline they could send > me. I am keen to construct one from aluminium sheet. >
There is a set of drawings in CISPR 20/EN 55020 but there are some fairly obvious mistakes in them concerning the details. -- Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk Interested in professional sound reinforcement and distribution? Then go to http://www.isce.org.uk PLEASE do NOT copy news posts to me by E-MAIL! This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
