Guys I am having hard time trying to compare between flammability rating according to UL and the glow wire test. In many of the safety standards (for example IEC335 series) a glow wire test is required and UL94 rated materials are not an option (or maybe they are?).
I was looking for a viable comparison between glow wire and the UL94 flammability rating. The point of this little comparison is to bypass the glow wire test for materials, which are properly rated for UL94. Regards Ilan Ilan Cohen Technical Director, Safety & Telecom Divisions I.T.L (PRODUCT TESTING) Ltd. 26 Hacharoshet St, POB 211, Or Yehuda, Israel. Tel 972-3-5339022, Fax 972-3-5339019 [email protected], website: http://www.itl.co.il This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
