Amund Check the standards applicable to your product - provided that you meet the standard at the output from your transmitter system (impedance etc.) you should be able to specify that any antenna meeting the relevant ETSI class may be used.
You will also have to specify the maximum gain of antennas that may be connected to your system so that it still complies with EMF/SAR requirements. regards Charlie Blackham Approvals Manager Airspan Communications Ltd From: Amund Westin [mailto:[email protected]] Sent: 14 May 2003 21:10 To: [email protected] Subject: RTTE - antennas Assume a CE / RTTE approved radio transmitter system, which consists of an indoor unit (modulator), an outdoor unit (HPA/LNB/OMT) and an antenna. If you change to another type of antenna (passive), will the system still be compliant to the RTTE directive ? Is antenna testing a part of the RTTE testing ? Best regards Amund Westin This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
