You could also try Keytek. Best regards,
Neil R. Barker Compliance Engineering Manager e2v technologies ltd Waterhouse Lane Chelmsford Essex CM1 2QU U.K. Tel: +44 (01245) 453616 Fax: +44 (01245) 453410 E-mail: [email protected] > -----Original Message----- > From: Jim Eichner [mailto:[email protected]] > Sent: 14 May 2003 00:43 > To: 'EMC-PSTC - forum' > Subject: RE: EFT and surge immunity test equipment brands > > > > Sorry - I should have remembered we have quotes on Schaffner > gear too. So > I'm looking for recommended brands beyond EMC-Partner, Haefely, and > Schaffner. > > Thanks, > Jim Eichner, P.Eng. > Compliance Engineering Manager > Xantrex Technology Inc. > phone: (604) 422-2546 > fax: (604) 420-1591 > e-mail: [email protected] > web: www.xantrex.com > Confidentiality Notice: This email message, including any > attachments, is > for the sole use of the intended recipient(s) and may contain > confidential > and privileged information. Any unauthorized review, use, > disclosure or > distribution is prohibited. If you are not the intended > recipient, please > contact the sender by reply e-mail and destroy all copies of > the original > message. > > > > -----Original Message----- > > From: Jim Eichner > > Sent: Tuesday, May 13, 2003 3:35 PM > > To: 'EMC-PSTC - forum' > > Cc: Ralph McDiarmid > > Subject: EFT and surge immunity test equipment brands > > > > So far, we have quotes on 2 manufacturer's units for the > above tests. I'm > > looking for more sources. My general impression so far is > no surprise - > > this is an exercise in trade-offs. > > > > EMC-Partner TRA-2000: This unit is an all-in-one product > with a decent > > price and has had favourable reviews in this forum. The > drawback with an > > all-in-one is that you can't have one project doing EFT > while another > > project is working on surge, and you lose both capabilities > if the unit is > > out for maintenance or calibration. Also we already have > ESD equipment, > > so we don't need this unit's capabilities in that area. > > > > Haefely: Have quotes on the PEFT4010 and the PSURGE4010 > with necessary > > accessories. The total cost of the two units is far higher > (+60%), but > > having separate units mitigates the objections above. > > > > So... > > > > 1. What other companies should I look at? > > > > 2. Anybody want to share any experiences / opinions on the Haefely > > equipment? Does the extra $$ get us extra performance and > reliability? > > > > Thanks in advance for your help, > > > > Jim Eichner, P.Eng. > > Compliance Engineering Manager > > Xantrex Technology Inc. > > phone: (604) 422-2546 > > fax: (604) 420-1591 > > e-mail: [email protected] > > web: www.xantrex.com > > Confidentiality Notice: This email message, including any > attachments, is > > for the sole use of the intended recipient(s) and may > contain confidential > > and privileged information. Any unauthorized review, use, > disclosure or > > distribution is prohibited. If you are not the intended > recipient, please > > contact the sender by reply e-mail and destroy all copies > of the original > > message. This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
