Hi all. In a similar situation to the thread headed Production Line Hi-Pot Test, I am advising on improving EMC on a product for the UK rail environment. This must pass a 1000Vdc 'voltage proof' test, and I would like to connect varistors where this test has to be applied.
Has anybody had experience with temporary disconnection of protection components during this test, as to whether this is an allowable practice? Many thanks, Jeff Chambers Dr Jeff Chambers Westbay Technology Ltd Suppliers of EMC Design Software Main St Baycliff Ulverston Cumbria LA12 9RN England Tel: 01229 869 108 Fax: 01229 869 108 http://www.westbay.ndirect.co.uk This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
