In a message dated 6/19/2003 2:04:28 PM Eastern Standard Time, [email protected] writes:
> Greg - > > My recollection of the FUS Procedures is that they checked > the laminate's manufacturer and type designation, but not > necessarily the flammability classification. Did that > change before you left UL? No, but for ZPMV2 printed wiring boards, the mfgr's name and type designation cross-reference to the flame rating. It's an extra "look-up" step, but it's covered under the FUS surveillance. Greg Galluccio Global Advantage International www.globaladvantage.ca This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
