I use 3, with 10 as "worst" case.  

                              - Robert -

       Robert A. Macy, PE    [email protected]
       408 286 3985              fx 408 297 9121
       AJM International Electronics Consultants
       101 E San Fernando, Suite 402
       San Jose, CA  95112


----- Original Message ----- 
From: <[email protected]>
To: <[email protected]>
Sent: Friday, June 13, 2003 3:57 AM
Subject: Crest Factor


> 
> I'm trying to spec a power supply. Can someone provide me with a typical
> crest factor that a typical power supply should be able to source without
> distortion.?
> 
> Thanks,
> Bob Heller
> 3M EMC Laboratory, 76-1-01
> St. Paul, MN 55107-1208
> Tel:  651- 778-6336
> Fax:  651-778-6252
> =======================================================
> 
> 
> -------------------------------------------
> This message is from the IEEE EMC Society Product Safety
> Technical Committee emc-pstc discussion list.
> 
> Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/
> 
> To cancel your subscription, send mail to:
>      [email protected]
> with the single line:
>      unsubscribe emc-pstc
> 
> For help, send mail to the list administrators:
>      Ron Pickard:              [email protected]
>      Dave Heald:               [email protected]
> 
> For policy questions, send mail to:
>      Richard Nute:           [email protected]
>      Jim Bacher:             [email protected]
> 
> Archive is being moved, we will announce when it is back on-line.
> All emc-pstc postings are archived and searchable on the web at:
>     http://www.ieeecommunities.org/emc-pstc



This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
    http://www.ieeecommunities.org/emc-pstc

Reply via email to