Dear Miguel, for relays we have rule that we are allowed to reduce the test time from 60 seconds to 0.5 seconds, when we increase the voltage by 10 percent. This has to be verified by a capability study. In most cases this rule works perfect
Werner Johler Tyco Electronics AXICOM Von: Miguel Abrahams [mailto:[email protected]] Gesendet: Donnerstag, 12. Juni 2003 18:01 An: '[email protected]' Betreff: Electric strength test I am looking for any technical information relating the voltage level and the applied time of the test signal in an electric strenght test. I want to find out how a dielectric test carried out at 2500Vac applied for 5 minutes compares to one carried out at 3000Vac applied for 1 minute. Thanks, Miguel Abrahams CAE Inc. This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
