I am looking to test to ASTM F 2052, "Standard test method for measurement of magnetically induced displacement force on medical devices in the Magnetic Resonance environment". It involves applying a large magnetic force to the EUT to see if it will get pulled inside an MRI machine during a scan.
Patty From: Peter L. Tarver [mailto:[email protected]] Sent: Monday, July 21, 2003 10:33 AM To: [email protected] Cc: Knudsen, Patricia J. Subject: RE: MRI-safe test lab Patricia - Can you be more specific as to what standards are applicable and what aspect of such testing you are looking for (EMC, safety, operational, other) Regards, Peter L. Tarver, PE Product Safety Manager Sanmina-SCI Homologation Services San Jose, CA [email protected] From: Knudsen, Patricia J. Sent: Monday, July 21, 2003 7:33 AM I am looking for a lab that can test medical products for use within an MRI room. Does anyone know of a test house that can do this, preferrably in the U.S. on the west coast? Patty Patricia Knudsen Sr. Certification Engineer Alaris Medical Systems Ph: (858) 458-7280 Fax: (858) 458-7095 [email protected] This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
