Hi Bob, Galen Koepke from NIST in Boulder is heading research in this area. I Tried (with KenJavor) to turn a large shield room into a emissions facility. The not so obvious con is that you get NO directional or polarization (if I remember right) info at all so debugging can be problematical.
Chas From: [email protected] [mailto:[email protected]]On Behalf Of [email protected] Sent: Wednesday, July 16, 2003 6:11 AM To: [email protected] Subject: Reverberation Chamber Can someone point me in the direction of a company or information on constructing a reverberation (mode-stirred) chamber. We would like to use it as a precompliant diagnostic facility/resource. Any experience using one? Pros? Cons? Thanks, Bob Heller 3M EMC Laboratory, 76-1-01 St. Paul, MN 55107-1208 Tel: 651- 778-6336 Fax: 651-778-6252 ======================================================= This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
