Forum: I have an aftermarket product that has been approved under 95/54/EC. For specification literature purposes, (product or user's manual) I am not sure what compliance standards should be listed for reference.
I do have a Type Approval # and a e-mark # required for the product. An example would be 89/336/EEC. I currently list EN55022:1998 and EN55024:1998 as the ITE product specific standards under the directive on the DoC and any literature. For 95/54/EC is there a standard that falls under the directive that I should list. As I am not familiar with the directive, I am not sure. Regards, Cyril A. Binnom Jr. EMI/EMC Approvals Engineer LXE, Inc. (770) 447-4224 Ext. 3240 (770) 447-6928 Fax [email protected] This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
