I need to characterize a filter up to 10 GHz, but my signal generator has a top end of 4 GHz. Is there a simple means of generating a third harmonic >from a signal generator while maintaining a 50 ohm source impedance? My thinking is that a diode circuit should be able to create the harmonics and then follow that circuit up with a 3-6 dB pad to maintain the source impedance. Am I on the right track? Any circuit and component suggestions would be appreciated.
Richard Woods Sensormatic Electronics Tyco International This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
