On Tue, 26 Aug 2003 09:54:04 +0800, "Paul Chan" <[email protected]> wrote:
> As far as I know there is no specific method of fulfilling Category > B product for Circular PSE Mark, the manufacturers or importers may > confirm these products by themselves. Is this true? Yes. Self-confirmation is permitted for products other than the specific electrical appliances (they are no longer called "Category B"). I would suggest to read (or make your agent in Japan to read) the Law and the Ordinance carefully, because notification to METI and some other paperworks are required for those products, too. > Is EMI or EMS involved? If so which standards to apply? There are specific EMI requirements, but you can use CISPR 13, CISPR 14 or CISPR 22 if they are adequate. Regards, Tom Tomonori Sato <[email protected]> URL: http://member.nifty.ne.jp/tsato/ This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
