Just a small heads up John.
I don't have the specs on the instruments that you are discussing but one
of the many things that the NIST folks want to know about your site are the
qualifications of the equipment. I don't remember all of the parameters and I
would think it unlikely that a good quality machine fails to meet them but you
may want to look back and confirm this equipment will meet the NVLAP or A2LA
inspections.
Gary
----- Original Message -----
From: John Jankowski <mailto:[email protected]>
To: [email protected]
Sent: Wednesday, August 27, 2003 11:32 AM
Subject: EMI receiver for OATS
List members,
I am in the process of expanding the capabilities of our Open Area Test
Site and have been searching for a replacement receiver.
During the IEEE EMC Symposium in Boston, I reviewed two models;
Schaffner - SMR 4518 ( 9khz-18Ghz)
Dynamic Sciences International - DSI 600 Series (20Hz - 27Ghz)
Would any members care to comment on their observation of these two
new receivers or, if there are owners of such, I would like to hear of your
success with either of these models.
I would appreciate any general feedback about the company DSI,
as I'm not familiar with this firm.
Please contact me off-list or by phone with all responses....
Thanks in advance!
John Jankowski
Computer Network Technology
609-518-4534
[email protected]
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
