Hans Thanks for the clarification, I was focusing on western Europe, but you are right in the eastern part it's different.
Lothar Schmidt BQB & Technical Manager EMC/Radio/SAR CETECOM Inc. 411 Dixon Landing Road Milpitas, CA 95035 ' +1 408 586 6214 7 +1 408 586 6299 From: hansm [mailto:[email protected]] Sent: Friday, August 15, 2003 9:50 AM To: Charles Blackham; Lothar Schmidt; Alex McNeil; [email protected] Subject: Re: CDMA Product Approvals CDMA 2G and 3G (or also known as CDMA-2000) are both deployed in Europe (but it depends what boundaries you include. Mostly are in eastern Europe). See following link of the CDMA development Group, CDG http://www.cdg.org/worldwide/index.asp Hans Mellberg Engineering Manager BACL 230 Commercial Street Sunnyvale CA 94085 USA 408-732-9162 x38 408-732-9164 fax ----- Original Message ----- From: "Charles Blackham" <[email protected]> To: "Lothar Schmidt" <[email protected]>; "Alex McNeil" <[email protected]>; <[email protected]> Sent: Friday, August 15, 2003 8:09 AM Subject: RE: CDMA Product Approvals > > CDMA is used in Europe for some Fixed radio application > > regards > Charlie > > -----Original Message----- > From: Lothar Schmidt [mailto:[email protected]] > Sent: 15 August 2003 15:33 > To: Charles Blackham; Alex McNeil; [email protected] > Subject: RE: CDMA Product Approvals > > > CDMA is a cellular phone technology, which is not used in Europe GSM is the > used technology in this region. > > FCC requirements depending on the used frequency band FCC part 22 and 24 > > Lothar Schmidt > BQB & Technical Manager > EMC/Radio/SAR > > CETECOM Inc. > 411 Dixon Landing Road > Milpitas, CA 95035 > > ' +1 408 586 6214 > 7 +1 408 586 6299 > > > > > > -----Original Message----- > From: Charles Blackham [mailto:[email protected]] > Sent: Friday, August 15, 2003 5:33 AM > To: Alex McNeil; [email protected] > Subject: RE: CDMA Product Approvals > > > > Alex > > Assuming the product is fixed, have a look at > > EN 301 753 for RF, and EN 301 489 family for EMC in Europe, available from > www.etsi.org. > > FCC parts 2, 15 and 24. > > regards > Charlie Blackham > Approvals Manager > Airspan Communications Ltd. > > -----Original Message----- > From: Alex McNeil [mailto:[email protected]] > Sent: 15 August 2003 09:56 > To: [email protected] > Subject: CDMA Product Approvals > > > > > Hi Group, > This is a technology I know nothing about (never heard off!) until my > marketing friends emailed me the approvals question! > > What are the approval requirements for a product that employs a wireless > CDMA module. I think I may be asking too much for worldwide standards > (although it would be very much appreciated), Europe? N.America? > > I have also heard I need EIRP measurements? > > Thanks in advance for your expert help. > > > Kind Regards > Alex McNeil > > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Ron Pickard: [email protected] > Dave Heald: [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > Archive is being moved, we will announce when it is back on-line. > All emc-pstc postings are archived and searchable on the web at: > http://www.ieeecommunities.org/emc-pstc > > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Ron Pickard: [email protected] > Dave Heald: [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > Archive is being moved, we will announce when it is back on-line. > All emc-pstc postings are archived and searchable on the web at: > http://www.ieeecommunities.org/emc-pstc > > > > > > >>> Download free spam killer at http://eliminatespam.com > > > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Ron Pickard: [email protected] > Dave Heald: [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > Archive is being moved, we will announce when it is back on-line. > All emc-pstc postings are archived and searchable on the web at: > http://www.ieeecommunities.org/emc-pstc > >>> Download free spam killer at http://eliminatespam.com This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
