Hello, All, In reviewing the ATEX directive(94/9/EC), it appears that a safety and control component (overload relay, circuit breaker)located outside of a potentially explosive environment which controls a process or equipment inside a potentially explosive environment must meet the requirements of the ATEX directive, and must be marked as such. Correct?
Also, must a "notified body" be used as a registrar for a component located outside of a potentially explosive environment(zone 3)? Thanks in advance. Don Sladek Eaton Corporation This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
