I think Gert meant to say 17025 standard...
Michael Sundstrom
NOKIA
TCC Dallas / EMC
of: (972) 374-1462
cell: (817) 917-5021
amateur call: KB5UKT
From: ext Ing. Gert Gremmen [mailto:[email protected]]
Sent: Tuesday, September 30, 2003 6:14 AM
To: ChengWee Lai; [email protected]
Subject: RE: EMC Precompliance system
I would not opt for a pre compliance kit, but buy a good
receiver and suitable antenna (compliance)and
any accessoires you need for testing separately.
Getting consistent results is already difficult with
compliant equipment, let alone using pre compliance sets.
If I have to choose between R&S and Agilent, I would choose
the manufacturer that has shown to committ itself to the EMC measurement
market.
Make sure however, that you keep the manuals in a safe. R&S have the
habit of not selling manuals for long time after sales has ceased,
nor making them available on the web. With the current upgrade rates
that could be faster then you want.
I have spent over 6 months locating a mnaual for an older ESVP
receiver. The receivers live mich longer then their manuals...
BTW the difference in precompliance can be difficult to
establish. Habitudes in EMC are using compliant equipment and
test set ups.
Current development is f.a ISO 10725 tend to allow for any set up
if calibration and establishemnt of measurement errors is feasible
and done. This would release us from compliant / non-compliant
differences....
Regards,
Gert Gremmen
Approvals manager
======================================================
ce-test, qualified testing
Member of EMC committee CENELEC/IEC
+ Independent Consultancy Services
+ Compliance Testing and Design for CE
+ Improvement of product quality and reliability
+ Testing services according to:
Electro magnetic Compatibility 89/336/EC
Electrical Safety 73/23/EC
Medical Devices 93/42/EC
Radio & Telecommunication Terminal equipment 99/5/EC
Website: www.cetest.nl (english)
www.ce-test.nl (dutch)
Phone : +31 10 415 24 26
Fax : +31 10 415 49 53
======================================================
From: [email protected]
[mailto:[email protected]]On Behalf Of ChengWee Lai
Sent: Monday, September 29, 2003 11:48 PM
To: [email protected]
Subject: EMC Precompliance system
Hello All,
I am thinking of getting an EMC precompliance system for debugging, and I
have come to two system, one from Agilent (84115EM)and another from Rohde &
Schwarz (Precompliance kits: with Receiver ESPI3, up to 3GHz)
Any experience in regard to following system, recomendation system or what
to look for would be really appreciated.
Thanks,
Chengwee Lai
Netscreen Technologies, Inc
Tel: +1-408-543-4126
email: [email protected]
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
