Hello All: I'm interested in obtaining a lumped model, consisting of R, L, and C elements, for a single pair of wires in a representative section of Category 5 UTP cable.
I gather that the complete specification for CAT 5 cable is contained in TIA/EIA-568, but I don't want to purchase the full standard just to get a representative model of the cable. In fact, I don't even know if TIA/EIA-568 contains a lumped approximation. Can anyone help me with this? Thanks, Joe Randolph Telecom Design Consultant Randolph Telecom, Inc. 781-721-2848 (USA) http://www.randolph-telecom.com This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
