It is available as a custom product at a cost of about $3 K for a spool. But I need just a little to see how well it works, and they won't do a sample. I was specifically looking for something off-the-shelf. For evaluation purposes the number of conductors doesn't matter as long as it is greater than five.
> From: John Woodgate <[email protected]> > Reply-To: John Woodgate <[email protected]> > Date: Thu, 18 Sep 2003 08:45:29 +0100 > To: [email protected] > Subject: Re: need shielded cable > > > I read in !emc-pstc that Ken Javor <[email protected]> wrote > (in <bb8e63cb.4e7f%[email protected]>) about 'need shielded > cable' on Wed, 17 Sep 2003: >> I am looking for a five conductor overall shielded cable. The wires >> need to be stranded and very small gauge, AWG 26 or smaller. My >> customer is interested in a double-shielded configuration - braid on the >> outside, foil on the inside. >> >> I have had no success finding such a product. >> > How much do you want? If you want a few miles or so, and can identify a > 'core', maybe for a 4-core individually-shielded cable, that is > suitable, the cable manufacturer *may* be prepared to make a 5-core > version for you. The smaller the manufacturer, in general, the more > accommodating they are. > > Have you looked for six-core individually-shielded cables? Of course, > seven cores would lay-up without a filler. > -- > Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk > Interested in professional sound reinforcement and distribution? Then go to > http://www.isce.org.uk > PLEASE do NOT copy news posts to me by E-MAIL! > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Ron Pickard: [email protected] > Dave Heald: [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > Archive is being moved, we will announce when it is back on-line. > All emc-pstc postings are archived and searchable on the web at: > http://www.ieeecommunities.org/emc-pstc > This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
