Try Capcon International Inc. http://www.capconemi.com/
From: GARY MCINTURFF [mailto:[email protected]] Sent: Monday, September 15, 2003 12:47 PM To: Chris Maxwell; [email protected]; [email protected] Subject: Re: Ferrite Sleeving If I remember correctly from years ago -its fairly brittle stuff and problematic in areas that experience much shock or vibration. Gary ----- Original Message ----- From: Chris Maxwell <mailto:[email protected]> To: [email protected] ; [email protected] Sent: Monday, September 15, 2003 7:12 AM Subject: RE: Ferrite Sleeving I have a sample of a flexible ferrite material from a company called Tokin. It is not a sleeving; but it is a thin (about .040") sheet, flexible enough to be rolled into a tubular shape. Personally, I haven't found an application for this stuff. Chris Maxwell | Design Engineer - Instruments Group email [email protected] | dir +1 315 266 5128 | fax +1 315 797 8024 NetTest | 6 Rhoads Drive, Utica, NY 13502 | USA web www.nettest.com | tel +1 315 797 4449 | > -----Original Message----- > From: [email protected] [SMTP:[email protected]] > Sent: Friday, September 12, 2003 3:29 PM > To: [email protected] > Subject: Ferrite Sleeving > > Hi, > > I'm looking for sources of flexible Ferrite sleeving. Can anyone help? > > Thanks, > > Derek Walton This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
