Hello Sam, I believe that IEC 60335-1 has the information you are looking for.
Best regards, Ron Wellman At 02:14 PM 10/29/2003 -0700, POWELL, DOUG wrote: >Sam, > >IEC 60950 (EN 60950) has: >Table 3D - Range of conductor sizes to be accepted by terminals >Table 3E - Sizes of terminals for mains supply conductors and protective >earthing conductors > >-doug > >------------------------------------- > >Douglas E. Powell >Corporate Compliance Dept. >Advanced Energy Industries, Inc. >Fort Collins, CO 80525 USA > > > >-----Original Message----- >From: Sam Davis [mailto:[email protected]] >Sent: Wednesday, October 29, 2003 11:01 AM >To: [email protected] >Subject: European conductor ampacity table > > > >Can anyone point me to a source of the European ratings for conductor size >vs ampere rating? I've got tons of hits for US requirements from the NEC, >but I need to find European requirements, and if they vary by country. > >Thanks, >Sam > > >------------------------------------------- >This message is from the IEEE EMC Society Product Safety >Technical Committee emc-pstc discussion list. > >Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > >To cancel your subscription, send mail to: > [email protected] >with the single line: > unsubscribe emc-pstc > >For help, send mail to the list administrators: > Ron Pickard: [email protected] > Dave Heald: [email protected] > >For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > >Archive is being moved, we will announce when it is back on-line. >All emc-pstc postings are archived and searchable on the web at: > http://www.ieeecommunities.org/emc-pstc > >_______________________________________________________________ >This message, including any attachments, may contain information >that is confidential and proprietary information of Advanced >Energy Industries, Inc. The dissemination, distribution, use >or copying of this message or any of its attachments is >strictly prohibited without the express written consent of >Advanced Energy Industries, Inc. > >------------------------------------------- >This message is from the IEEE EMC Society Product Safety >Technical Committee emc-pstc discussion list. > >Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > >To cancel your subscription, send mail to: > [email protected] >with the single line: > unsubscribe emc-pstc > >For help, send mail to the list administrators: > Ron Pickard: [email protected] > Dave Heald: [email protected] > >For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > >Archive is being moved, we will announce when it is back on-line. >All emc-pstc postings are archived and searchable on the web at: > http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
