One of the principal differences between the standards is the Ant. distance. EN 55011 uses antenna distances of 10 and 30 meters. Some products may be allowed to be tested at only 3 meters, but you haven't told us what the EUT is, so I cannot say.
John
"Konrad Stefanski"
<[email protected]. To: "emc-pstc"
<[email protected]>
pl> cc:
Sent by: Subject: EN 55011 vs EN
55022
owner-emc-pstc@majordo
mo.ieee.org
01/04/1999 01:23 PM
Please respond to
"Konrad Stefanski"
Hello.
Maybe one of you have article about differences in radiated emission
measurements acc. to EN 55011 and 55022. I would like to know why I
couldn'd measure radiated emission acc. to EN 55011 in 3m semi-anechoic
chamber.
Thanks in advance
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
