Tom,
Our centrifuges are not used to process anything that is reintroduced back into a patient. Accordingly couldn't these centrifuges be considered only as general laboratory equipment covered by the LVD standards IEC 1010 / EN 601010 Safety Requirements for Electrical Equipment for Measurement Control and Laboratory Use and 1010-2-020, Part 0-020 Particular Requirements for Laboratory Centrifuges ? Regards, Paul S From: T.Sato [mailto:[email protected]] Sent: Wednesday, October 15, 2003 9:30 AM To: [email protected] Subject: RE: centrifuges and the MDD On Wed, 15 Oct 2003 08:06:26 -0400, "Ned Devine" <[email protected]> wrote: > If the centrifuge is used for blood, then it is covered under the MDD. Maybe the In-Vitro Directive, if the centrifuge is intended to be used for in-vitro diagnostic applications. Regards, Tom Tomonori Sato <[email protected]> URL: http://member.nifty.ne.jp/tsato/ This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
