I am reviewing some dissimilar material combinations in an earthing path. I have reviewed a lot data available on-line and in a few reference texts. I would now like to better understand the origins of Table J.1 in IEC60950.
Does anyone know where the data on which Table J.1 is based originated? Was it a reference standard or data from an industry association? Something else? I am finding Table J.1 might be useful as a reference, but little else. The types of alloys referenced can have electrochemical potential differences relative to one another that vary 10% or more from the values shown in the table. I'd appreciate any input you might have. Regards, Peter L. Tarver, PE Product Safety Manager Homologation Services Sanmina-SCI Corp. San Jose, CA [email protected] This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
