The ETS catalog confirms this antenna does in fact have a balun built in. Tom Donnelly Smiths Aerospace Actuation Systems tdonnelly@act-sys
From: Luke Turnbull [mailto:[email protected]] Sent: Monday, October 13, 2003 6:56 AM To: [email protected]; [email protected] Subject: Re: Balun of bi-conical antenna. Any Commercially available Biconical Antenna should have a balun built in to the structure of the antenna. (Normally a block that the elements connect into). The output will be a 50ohm N-type or BNC and can be used with the usual 50ohm unbalanced cable. Luke Turnbull >>> LEUNG YAT WAH DEREK <[email protected]> 10/13/03 05:44am >>> My existing configuration ( for education purpose) of radiated emission test is connect the EMCO bi-conical antenna, Model 3110B( 30M to 300MHz) antenna directly to the amplifier and then to the spectrum analyzer, I read some books it should include the Balun when feed into the antenna, is there anyone know where to buy or how to build the Balun, and any negative effect if without balun, thanks advance for any help. Derek Leung. This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
