I read in !emc-pstc that Peter L. Tarver <[email protected]> wrote (in <[email protected]>) about '10/100 Ethernet transformers meeting IEC60950 Basic insulation' on Fri, 14 Nov 2003: >FWIW, there is a proposal in TC108 (108/69/CD) to permit limited use of >enameled magnet wire for compliance with TNV-x requirements. I don't >know the current status of this document and can not accurately predict >(who can?) it's complexion in final for.
You can get a lot of information from the public part of the IEC web site: Committee 108 Current document 108/69/CD Current status 1CD - 1st Committee Draft Title: Modifications in clause 2.10 and Annex G Remarks: - CDV 2004-04 FDIS 2004-11 [These are forecasts made at an early stage] HISTORY OF THE PROJECT Stage Document Date Target Date AMW 108/86/MCR 4 July 2003 1CD 108/69/CD 4 July 2003 A2CD 30 November 2003 >From this we can conclude that the reaction of National Committees to the 1CD, 108/69/CD, was less than enthusiastic (otherwise it would have gone to CDV - first voting stage) and a second CD will be circulated. Theoretically, the schedule for CDV in April 2004 could JUST still be met, but probably it won't be. -- Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk Interested in professional sound reinforcement and distribution? Then go to http://www.isce.org.uk PLEASE do NOT copy news posts to me by E-MAIL! This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
