EN 61000-3-2 is not a generic standard. It is a product family standard
(says so right in the standard plus it is listed in the OJ, generic
standards do not show up in the OJ).
Chris has a point, since 61000-3-2 is a stand-alone product family standard
(all equipment 16A and under), it is not necessary for anything else to
call it up.
Bob Heller
3M EMC Laboratory, 76-1-01
St. Paul, MN 55107-1208
Tel: 651- 778-6336
Fax: 651-778-6252
=======================================================
"Barker, Neil"
<Neil.Barker@e2vtechno To: "'Colgan
Christopher [Soundcraft UK]'" <[email protected]>
logies.com>
[email protected]
Sent by: cc:
owner-emc-pstc@majordo Subject: RE: EN
61000-3-2:2000
mo.ieee.org
11/11/2003 05:37 AM
Please respond to
"Barker, Neil"
Chris,
EN55103-1 is a product family standard, which takes precedence over generic
standards, and must therefore make reference to all Basic Standards that
are
applicable to equipment within its scope. You will also find that
EN61000-3-2 is called up by the generic standards such as EN61000-6-3.
Best regards,
Neil R. Barker C.Eng. MIEE MIEEE MSEE
Manager
Compliance Engineering
e2v technologies ltd
106 Waterhouse Lane
Chelmsford
Essex
CM1 2QU
UK
Tel: +44 (0)1245 453616
Fax: +44 (0)1245 453410
e-mail: [email protected]
Web: http://www.e2vtechnologies.com
From: Colgan Christopher [Soundcraft UK]
[mailto:[email protected]]
Sent: 11 November 2003 10:14
To: [email protected]
Subject: RE: EN 61000-3-2:2000
I think we are in agreement that conformity to EN61000-3-2 is required for
a
mains powered product to comply with the EMC Directive (using the standards
route).
What puzzles me is, why does EN55103-1 (pro audio emissions) call up
EN61000-3-2? Surely there is no need for the standard to do this?
Regards
Chris Colgan
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
