Dear Ian Declaration should be on a single document, typically a single page.
You can follow the attached link for samples. http://www.itl.co.il/declarations.html ---------------------------------------------------------- Ilan Cohen Technical Director, Safety & Telecom Divisions I.T.L (PRODUCT TESTING) Ltd. 26 Hacharoshet St, POB 211, Or Yehuda, Israel. Tel 972-3-5339022, Fax 972-3-5339019 [email protected], website: http://www.itl.co.il ------------------------------------------------------------ ---------------------------------------------------------------- I-SPEC: The best place on the internet to learn about safety !! http://www.i-spec.com/ (I-Spec is provided free of charge as a service by ITL to the compliance community) ----------------------------------------------------------------- -----Original Message----- From: [email protected] [ mailto:[email protected]] Sent: Monday, December 22, 2003 11:13 AM To: [email protected] Subject: CE declaration Dear colleagues with knowledge of matters CE, As I see it there are two methods of declaring CE compliance: a) Prepare a single CE marking declaration document that lists all the relevant directives and the standards used to show compliance. OR b) Prepare a series of separate declaration documents, each one covering a single directive and listing the standards used to show compliance. A list of the CE marking directives is then included in, for example, the equipment instruction manual. Can any CE marking wizards advise me which of these (if any) is the "legal" approach? If "a)", are we obliged to present the information to the customer by placing a copy, or a distillation of the information it contains, in the equipment manual? Many thanks in anticipation of your help. Very many thanks in anticipation of your replies and best wishes for Christmas and the New Year. Ian Unwin Servomex Group Limited ********************************************* *Register now at www.servomex.com/zap.html * *for an opportunity to win a digital camera * ********************************************* ________________________________________________________________________ This email has been scanned for all viruses by the MessageLabs SkyScan service. This electronic message contains information from Servomex which may be privileged or confidential. The information is intended to be for the use of the individual(s) or entity named above. If you are not the intended recipient be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited. If you have received this electronic message in error, please notify us immediately. Activity and use of the Servomex E-mail system is monitored to secure its effective operation and for other lawful business purposes. Communications using this system may also be monitored and may be recorded to secure effective operation and for other lawful business purposes. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
