This is a multi-part message in MIME format.
Hi, all, I resend this question in .PDF file.
Zhang Guoqing ----- Original Message ----- From: "Neil Helsby" <[email protected]> To: "Zhang Guoqing" <[email protected]>; <[email protected]> Sent: Tuesday, December 16, 2003 4:28 PM Subject: Re: How to mark the power rating and describe in the CB report? Original Message dated 15/12/2003, 12:40:08 Author: Zhang Guoqing <[email protected]> Re: How to mark the power rating and describe in the CB report?: Hi, Group, I have aquestion. When one equipment have two power input which one can power for the equipment and one is only for backup, how to mark the power rating? Is rating label required for the whole equipment? if yes, how to mark the power rating in the label in this case? >>> Your message was not fully received, but I think the answer to your questions can be found in EN 60950; look in the index under "multiple power sources". Since each power input could supply the full input requirements, they would each need identical ratings labels. Note, however, that EN 60950 requires a prominent warning label to indicate to service / maintenance personnel regarding the removal of ALL power from the unit (section 3.4.11). We use one label per input where these are not adjacent on the unit. Regards, Neil Helsby ********************************************************************** This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This footnote confirms that this email message has been swept for the presence of computer viruses and is believed to be clean. **********************************************************************Title: power rating label
Hi, all,
I resend this question in .PDF file.
Zhang Guoqing
----- Original Message -----
From: "Neil Helsby" <[email protected]>
To: "Zhang Guoqing" <[email protected]>; <[email protected]>
Sent: Tuesday, December 16, 2003 4:28 PM
Subject: Re: How to mark the power rating and describe in the CB report?
Original Message dated 15/12/2003, 12:40:08
Author: Zhang Guoqing <[email protected]>
Re: How to mark the power rating and describe in the CB report?:
Hi, Group,
I have aquestion. When one equipment have two power input which one can
power for the equipment and one is only for backup, how to mark the power
rating?
Is rating label required for the whole equipment? if yes, how to mark the
power rating in the label in this case?
>>>
Your message was not fully received, but I think the answer to your
questions can be found in EN 60950; look in the index under "multiple
power sources".
Since each power input could supply the full input requirements, they
would each need identical ratings labels. Note, however, that EN 60950
requires a prominent warning label to indicate to service / maintenance
personnel regarding the removal of ALL power from the unit (section
3.4.11). We use one label per input where these are not adjacent on the unit.
Regards,
Neil Helsby
**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.
This footnote confirms that this email message has been swept
for the presence of computer viruses and is believed to be clean.
**********************************************************************
How to mark the power rating.pdf
Description: Binary data
