Guys (and ladies) There was an email earlier today about Australia updating its product safety standard TS-001 to use a harmonized version of IEC 60950.
Having some products tested to TS-001, I have some interest in this subject. I also have an interest in knowing whether my existing test data is any good. So I did a little bit of digging. I went to the ACA home page and did a search on "RTA list". (RTA is a Recognized Testing Authority) The first result of the search is a document that mentions an Australian NATA (National Association of Testing Authorities) website. Check out the following link at Australia's NATA (National Association of Testing Authorities) website. It appears to be a list of Recognized Testing Authorities along with the scope of their accreditation. Surf at your own risk :-) http://www.nata.asn.au/fs_directory.htm Happy holidays, Chris Maxwell Design Engineer Nettest, Utica, NY 315-266-5128 [email protected] This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
