This is a multi-part message in MIME format.
We have had good face-to-face meetings with Elgar and Behlman and have considered California Controls.
We have been looking at minimum 100 KVA units because our needs are 100A/phase, input from 200V to 480V. It is quite true that the extra amperage comes with a high cost, but if it is what you need. . . Bryan Hardman Staff Engineer - Compliance Advanced Energy Industries, Inc. Fort Collins, CO 80525 Phone: 970-407-6617 FAX: 970-407-5617 email: [email protected] From: Price, Ed [mailto:[email protected]] Sent: Tuesday, January 20, 2004 4:09 PM To: [email protected] Subject: RE: AC Power Source Manufactures >-----Original Message----- >From: Spencer, David H [mailto:[email protected]] >Sent: Tuesday, January 20, 2004 12:28 PM >To: [email protected] >Subject: AC Power Source Manufactures > > > >Howdy all, > >I'm looking for manufactures of AC power sources that meet the >requirements >of 61000-3-12/CDV. >Currently I've only found one source: California Instruments, and I'm >looking for others. > >The AC source should have an upper range to 75amps, 3 Phase 230/400Vac. > >I've looked at power converters; however, most manufactures of power >converters don't have the specifications available (listed or >with sales >personnel) that the standard calls out: i.e. output >impedance/Short circuit >ratio, voltage harmonic distortion, et. al. > > >Any help would be great... > > >Thanks > >Best Regards >David Spencer >Xerox Corporation > Try: http://www.elgar.com/ http://www.pacificpower.com/ http://www.mgeups.com/indexus.htm Regards, Ed Ed Price [email protected] WB6WSN NARTE Certified EMC Engineer & Technician Electromagnetic Compatibility Lab Cubic Defense Applications San Diego, CA USA 858-505-2780 (Voice) 858-505-1583 (Fax) Military & Avionics EMC Is Our Specialty This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstcTitle: RE: AC Power Source Manufactures
We have had good face-to-face meetings with Elgar and Behlman and have considered California Controls.
We have been looking at minimum 100 KVA units because our needs are 100A/phase, input from 200V to 480V. It is quite true that the extra amperage comes with a high cost, but if it is what you need. . .
Bryan Hardman
Staff Engineer - Compliance
Advanced Energy Industries, Inc.
Fort Collins, CO 80525
Phone: 970-407-6617
FAX: 970-407-5617
email: [email protected]
-----Original Message-----
From: Price, Ed [mailto:[email protected]]
Sent: Tuesday, January 20, 2004 4:09 PM
To: [email protected]
Subject: RE: AC Power Source Manufactures
>-----Original Message-----
>From: Spencer, David H [mailto:[email protected]]
>Sent: Tuesday, January 20, 2004 12:28 PM
>To: [email protected]
>Subject: AC Power Source Manufactures
>
>
>
>Howdy all,
>
>I'm looking for manufactures of AC power sources that meet the
>requirements
>of 61000-3-12/CDV.
>Currently I've only found one source: California Instruments, and I'm
>looking for others.
>
>The AC source should have an upper range to 75amps, 3 Phase 230/400Vac.
>
>I've looked at power converters; however, most manufactures of power
>converters don't have the specifications available (listed or
>with sales
>personnel) that the standard calls out: i.e. output
>impedance/Short circuit
>ratio, voltage harmonic distortion, et. al.
>
>
>Any help would be great...
>
>
>Thanks
>
>Best Regards
>David Spencer
>Xerox Corporation
>
Try:
http://www.mgeups.com/indexus.htm
Regards,
Ed
Ed Price
[email protected] WB6WSN
NARTE Certified EMC Engineer & Technician
Electromagnetic Compatibility Lab
Cubic Defense Applications
San Diego, CA USA
858-505-2780 (Voice)
858-505-1583 (Fax)
Military & Avionics EMC Is Our Specialty
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ieee-pses.org/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
ATT157394.txt
Description: Binary data
