Derek, I do not believe that there is a harmonized standard that provides
measuring methods
above a gig. However, there is a guidance document that was issued by the
EC Association
of Competent Bodies (ECACB) that can be found at:

http//europa.eu.int/comm/enterprize/electr_equipment/emc/guides/emcguide.htm

Go to the bottom of the page and click on "technical guidance notes" and
look at TGN 9.

Bob Heller
3M EMC Laboratory, 76-1-01
St. Paul, MN 55107-1208
Tel:  651- 778-6336
Fax:  651-778-6252
=======================================================


                                                                              
                                                         
                      "Derek Walton"                                          
                                                         
                      <[email protected]>         To:       [email protected]
                                                         
                      Sent by:                     cc:                        
                                                         
                      owner-emc-pstc@majordo       Subject:  EN 55022         
                                                         
                      mo.ieee.org                                             
                                                         
                                                                              
                                                         
                                                                              
                                                         
                      02/11/2004 04:34 PM                                     
                                                         
                      Please respond to                                       
                                                         
                      "Derek Walton"                                          
                                                         
                                                                              
                                                         
                                                                              
                                                         




Hi Folks,

I was asked a question. EN 55022 currently calls for stopping testing at 1
GHz... Or does it?

What guidlines would one follow to test a 2 GHz PC?

Thanks,
--
Derek N. Walton
L F Rsearch
Poplar Grove, IL61065, USA
------------------------------------------- This message is from the IEEE
EMC Society Product Safety Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ieee-pses.org/ To cancel your
subscription, send mail to: [email protected] with the single line:
unsubscribe emc-pstc For help, send mail to the list administrators: Ron
Pickard: [email protected] Dave Heald: [email protected] For policy
questions, send mail to: Richard Nute: [email protected] Jim Bacher:
[email protected] All emc-pstc postings are archived and searchable on the
web at: http://www.ieeecommunities.org/emc-pstc




This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ieee-pses.org/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
    http://www.ieeecommunities.org/emc-pstc

Reply via email to