Ralph,

I have never found a preselector to be particularly useful for my
applications. My measurements have at times required filtering, however.
When I am measuring harmonics of a transmitter I need a high pass filter or
notch filter specific to that carrier frequency.  If I need a lower noise
floor for measuring digital device emissions, a reasonable quality preamp
and proper bandwidth arrangements usually suffice.

Hope this helps,

Don Umbdenstock
Sensormatic


From: Ralph McDiarmid [mailto:[email protected]]
Sent: Friday, March 26, 2004 2:45 PM
To: [email protected]
Subject: RE: Semi-anechoic chamber & a preselector



Does anyone in the group have experience with the need for a RF preselector
used in a 3m chamber?  I suspect it is really necessary more for an OATS
where out-of-band strong ambients could present a problem for the
attenuator/mixer in a SA.

Thanks,

Ralph McDiarmid, AScT 
Compliance Engineering Group 
Xantrex Technology Inc.


This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ieee-pses.org/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
    http://www.ieeecommunities.org/emc-pstc


This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ieee-pses.org/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
    http://www.ieeecommunities.org/emc-pstc

Reply via email to