The antenna is calibrated in free space, its use must simulate that with no loading of the antenna.
> From: "Luke Turnbull" <[email protected]> > Reply-To: "Luke Turnbull" <[email protected]> > Date: Fri, 05 Mar 2004 15:30:54 +0000 > To: <[email protected]> > Subject: Chamber radiated emissions question. > > > Dear all, > > CISPR 25 has some requirements for the proximity of EUT and antennas to the > screened enclosure: > > 1. No closer than 1m from any absorber. > 2. No closer than 2m from the chamber wall. > > Does anybody know the technical reasons for these requirements? > > Thanks in advance, > > Luke Turnbull > > > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ieee-pses.org/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Ron Pickard: [email protected] > Dave Heald: [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieeecommunities.org/emc-pstc > This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
