Hi everyone, I don't believe I have posted this article yet this month to the list.
This month's Technical Tidbit at http://emcesd.com is written by guest author, Brent DeWitt from the SI-List, and discusses yet another use for a paper clip in debugging designs. Abstract: The following article describes the adaptation of a commercial ESD gun to apply local H-field pulses for troubleshooting sensitive circuits. The key components are a section of brass tubing, some brass strap and a paper clip! Just page down to the bottom of the index page and click on the picture of the ESD gun tip near a scope probe. If you would like to contribute a Technical Tidbit article, let me know the topic. Doug -- ___ _ Doug Smith \ / ) P.O. Box 1457 ========= Los Gatos, CA 95031-1457 _ / \ / \ _ TEL/FAX: 408-356-4186/358-3799 / /\ \ ] / /\ \ Mobile: 408-858-4528 | q-----( ) | o | Email: [email protected] \ _ / ] \ _ / Website: http://www.dsmith.org This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
