In article <[email protected]>, Scott Douglas <[email protected]> writes
>IEC 60065 6th Edition had a list of Japan deviations that were >presumably published in the CB Bulletin. Are these not the deviations of the **Japanese National Standard** from the 6th Edition? Rather than 'In Japan, ....' texts in the standard itself? >But when I asked my local >safety agency to include the Japan deviations in my latest CB report >using IEC 60065 7th Edition, he told me that he could not find any. He >looked in the last few CB Bulletins (106 and 107 I think, even went back >a few before those too). > >Can anyone tell me if there are Japan deviations for IEC 60065 7th >Edition? Is there some lag time between issuance of the standard and >publication of the deviations in the bulletin? If yes, how long? If >there still should be Japan deviations for the 7th Edition and they are >not yet published, what do we do? Use the 6th Edition deviations in a >7th edition test report? If the Japanese National Committee has not yet published a Japanese version of the 7th edition, naturally there can be no information on differences in the CB Bulletin. -- Regards, John Woodgate, OOO - Own Opinions Only. The good news is that nothing is compulsory. The bad news is that everything is prohibited. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
