http://www.ieee-pses.org/symposium
http://www.emc2004.org/
Dear All,
As per section 15.31 (d) of FCC part 15,
"Field strength measurements shall be made, to the extent possible, on an
open field site. Test sites other than open field sites may be employed if
they are properly calibrated so that the measurement results correspond to
what would be obtained from an open field site."
Has anybody done ever a closed chamber measurement and obtained FCC
ID? Will FCC accept closed chamber measurements? I request you all to share
your experience in this regard.
Sincerely
K.Balasubramanian
Sr.Engineer, Hardware.
This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list.
IEEE PSES Main Website: http://www.ieee-pses.org/
To post a message send your e-mail to [email protected]
Instructions for use of the list server:
http://listserv.ieee.org/listserv/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
