http://www.ieee-pses.org/symposium http://www.emc2004.org/ --------------------------------------------------
Hi Forum, If I put an approved GSM/GPRS module in an enclosure onto a simple PCB which supplies power and 3 X RS232 ports (feed thru only) and a seperate "GSM/GPRS approved" commercial external antenna is attached to this enclosure for better reception. In your opninion do I need to get the GSM/GPRS box fully approved again to the following or is their short cuts?: EN 301 419-1 (GSM ) EN 301 489-1 and -7 (GSM EMC) EN 55022 Class B (conducted mains and radiated emissions) EN 55024 (EN61000-4-2, -3, -4, -5, -6, -8, -11) EN 61000-3-2 (if >75W) EN 61000-3-3 (not applicable) EN 50371 (SAR for low electronic power products) EN60950-1 (ITE Safety) I look forward to your kind replies as always! Regards ALEX ________________________________________________________________________ This email has been scanned for all known viruses and appropriate content by the Messagelabs mail service. ------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. IEEE PSES Main Website: http://www.ieee-pses.org/ To post a message send your e-mail to [email protected] Instructions for use of the list server: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
