Jeffrey
Try Hydal, www.hydal.com. We looked at them a few years back.
Switched approaches before implementing with their cabinet so I didn't
actually try to get them through the process, but they were a very nicely
engineered, if expensive, solution. Again I don't remember the exact
specifications, but they provided both heat and cooling.
Gary
From: Peter L. Tarver [mailto:[email protected]]
Sent: Wednesday, August 25, 2004 6:47 AM
To: [email protected]
Subject: RE: Verizon Outdoor Hut Spec's
Jeff -
Look at GR-487-CORE.
Regards,
Peter L. Tarver, PE
[email protected]
From: jeff collins
Sent: Monday, August 23, 2004 8:13 PM
Group,
Has anyone ever built or bought a Hut / Above Ground
building that utilizes an air conditioning system to provide
a suitable environment for Broadband / Telco equipment and
the crafts-person for Verizon.
I am working on a project where we must also supply the building to house
the Telecom equipment. Any specific info on outdoor "Building" requirements
for Verizon is appreciated.
Telcordia GR-43 is the Generic standard that covers these
type of enclosures / buildings however I was looking for something specific
to VZ based on previous experiences.
Thanks in advance,
Jeff Colliins
Sr. HW Engineering Manager & Principal Engineer
NEBS, Reliability/MTBF, EMC, Safety, DVT, Telecom,
Compliance & Homologation
Ciena Corp. July 1999 to June 30, 2004
This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/listserv/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/listserv/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
