Most ESD targets, including the Pellegrini, are about 2 ohms and have a bandwidth to several GHz....
For a 10GHz target, contact Hans Melberg at [email protected] or +1 (408) 732-9162 EXT 38 Best Regards, Michael Hopkins Manager, Customer Technical Center Control Technology Division Compliance Test Solutions Thermo Electron Corporation One Lowell Research Center Lowell, MA 01852 Tel: +1 978 275 0800 ext. 334 Mobile: +1 603 765 3736 [email protected] One Thermo, committed to integrity, intensity, innovation & involvement From: [email protected] [mailto:[email protected]] On Behalf Of Brent DeWitt Sent: Wednesday, October 20, 2004 9:23 PM To: [email protected] Subject: non-Pellegrini test target? Fishing for knowledge here folks. My lab has an ESD target built by the late Hugh Hyatt at Hyger Physics a few years back. It's apparently designed to have better high frequency characteristics. My problem is that I have absolutly no information on it. A quick check with an ohm meter suggests it was not built for a 50 ohm system (SMA reads 3.5 ohms pin to shell). Can any of you who knew Hugh shed any light on this? Thanks! Brent DeWitt This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Scott Douglas [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Scott Douglas [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
