Group, I am looking for information on cable shielding for a potential Radiated Emissions problem. Unfortunately due to equipment performance requirements we cannot filter the lines and must shield the cables. I am looking for a source of information on the difference in performance that can be expected using a single braided shield, a double braided shield with no insulating layer between, or a double braided shield with an insulating layer between. We cannot meet the emissions with a single shield and must use a second shield. We are trying to determine what the effect of an insulating layer between the shields on performance. We are trying to balance weight and performance concerns and don't want to add the weight unless required. All shields will be 95% optical coverage, and will be terminated on both ends with a good quality EMI backshells. Thanks,
Tom [email protected] ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Scott Douglas [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
