In a message dated 11/12/2004 1:30:21 PM Central Standard Time, tdonne...@act-sys.com writes:
I am looking for a HIRF test facility that can handle 3000 V/m from 2 to 12 GHz. I have to test from 10 kHz to 40 GHz but at lower levels. I have a fairly large system for testing so I am leaning towards a reverb chamber to get around small antenna beam width issues. Any leads for a test house, or advice on doing this testing is appreciated. Thanks, Tom Donnelly Smiths Aerospace Actuation Systems 973-428-9898 x445 tdonne...@act-sys.com Hi Tom, you may want to talk to the folks at PAX River Navel Base. Start with Diane Kempf. If your needs are closer to Christmas, I should be able to do that. Sincerely Derek Walton L F Research. ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Scott Douglas emcp...@ptcnh.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc