schurter, wickman, littelfuse.
> -----Original Message----- > From: Leber Jody-G19980 [mailto:[email protected]] > Sent: Thursday, January 06, 2005 9:13 AM > To: 'Brian O'Connell'; [email protected] > Subject: RE: 6.3 A Fuse Limit > > > Brian, > > Are you or anyone else on the list aware of any manufacturers > of an 8 A or greater fuse that have certification yet. > > Jody > > > -----Original Message----- > > From: Brian O'Connell [mailto:[email protected]] > > Sent: Thursday, January 06, 2005 11:19 AM > > To: Leber Jody-G19980; [email protected] > > Subject: RE: 6.3 A Fuse Limit > > > > > > EN60127-2:2003 allows certification of fuses up to 10 A. > > > > luck, > > Brian > > > > > -----Original Message----- > > > From: Leber Jody-G19980 [mailto:[email protected]] > > > Sent: Thursday, January 06, 2005 7:55 AM > > > To: [email protected] > > > Subject: 6.3 A Fuse Limit > > > > > > > > > All, > > > > > > I have a question concerning fuses evaluated to IEC 60127. > > > Why is the limit for fuses 6.3 A? Is this based on the power > > > systems in Europe or some other requirements. I do not have > > > access to the IEC standard and searches on the internet as > > > well as calls to the certification houses have not been > > very fruitful. > > > > > > Best Regards, > > > > > > Jody Leber > > > Senior Regulatory Engineer > > > > > > [email protected] > > > http://www.motorola.com/producttesting > > > > > > Motorola Product Testing Services > > > 1700 Belle Meade Court > > > Lawrenceville, GA 30043 > > > > > > 770.338.3581 P > > > 678.201.7270 C > > > 847.761.3145 F > > > > > > ---------------------------------------------------------------- > > > This message is from the IEEE Product Safety Engineering Society > > > emc-pstc discussion list. Website: http://www.ieee-pses.org/ > > > > > > To post a message to the list, send your e-mail to > [email protected] > > > > > > Instructions: > > > http://listserv.ieee.org/listserv/request/user-guide.html > > > > > > List rules: http://www.ieee-pses.org/listrules.html > > > > > > For help, send mail to the list administrators: > > > > > > Scott Douglas [email protected] > > > Mike Mcantwell [email protected] > > > > > > For policy questions, send mail to: > > > > > > Richard Nute: [email protected] > > > Jim Bacher: [email protected] > > > > > > All emc-pstc postings are archived and searchable on the web at: > > > > > > http://www.ieeecommunities.org/emc-pstc > > > > > > This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Mcantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
