Thanks Rich - that answers that one! Jim Eichner, P.Eng. Compliance Engineering Manager Xantrex Technology Inc. e-mail: [email protected] web: www.xantrex.com Confidentiality Notice: This email message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.
From: Rich Nute [mailto:[email protected]] Sent: Wednesday, January 05, 2005 1:44 PM To: Jim Eichner Cc: Product Safety Technical Committee Subject: Re: FW: IEC 60417 graphical symbols Hi Jim: > I agree, but if you go for a paper copy you lose the ability that I > assume the web-based service gives you: to download (or copy to > clipboard) soft copies of the symbols. Can someone tell us if the > web-based version allows this? I have an electronic copy of 417 (which anyone can buy from the IEC web site). I acquired this before you could subscribe to the 417 web site. As with the printed copy, the symbols are on a grid. So, you can't really apply the symbols directly from 417; instead, you must re-create the symbol in your own favorite drawing package. Best regards, Rich This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Mcantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
