I have a data transponder that will be sold to the Australian military. The device is self-contained, remote-controlled, with internal backup batteries, although it also connects to the mains powerlines. The device acts as a modem, transferring data from an Ethernet cable to a 20 Watt (peak) 250 MHz (approximately) RF transmitter / receiver. It will be mounted in a tower hut in physically remote regions, and will use an omnidirectional antenna mounted high atop the tower.
A customer document says that, although Australian C-Tick formal compliance is not needed, the device must "meet the C-Tick technical requirements." So, fellow adventurers, what types of technical requirements do you see in my future? Thanks in advance! Ed Price [email protected] WB6WSN NARTE Certified EMC Engineer & Technician Electromagnetic Compatibility Lab Cubic Defense Applications San Diego, CA USA 858-505-2780 (Voice) 858-505-1583 (Fax) Military & Avionics EMC Is Our Specialty ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
