Hello Group, Wondering if anyone knows of a standard for security (tamper-proof) fasteners? We all know what they are, but is there a standard out there that describes and constitutes what a security fastener. I've searched high and low with no results.
Thank you all for your time and assistance, David Cereceres Regulatory Engineer Safety & Environmental Pelco 3500 Pelco Way Clovis, CA 93612 Phone: 559.292.1981 ext.3493 Pax: 559.294.3707 [email protected] <mailto:[email protected]> www.Pelco.com <http://www.pelco.com/> ================ Confidentiality Note: The information contained in this transmission is legally privileged and confidential, intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you receive this communication in error, please delete the message and notify us immediately by telephone call to +1-559-292-1981. ================ This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
