Yes, I have tried that with a little degree of success because the orientation of the EUT. Getting a view with enough contrast from the back-lit LCD panel is always a real challenge. At present spotting a momentary "transient" event like a flicker on the LCD display panel is almost an impossibility.
:-) I did mention the possible use of a "prism" very much like the ones found on top in a typical SLR camera. That was in a private reply to an off the PSTC email. However I have not gone around to get the parts to test the idea yet. regards & thanks Tim Foo "Peter L. Tarver" <[email protected]> Sent by: [email protected] 16/06/2005 10:17 PM a plain piece of glass held at the correct angle will reflect a lot of light, though not as well as a mirror. position management would be trickier than for a mirror. Regards, Peter L. Tarver, PE [email protected] <snip> This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
