[email protected] wrote (in <of74f1ffa6.010586a4-on8825701b.0077dccb-8825701b.00792...@teal.com>) about 'EN61000-3-12 implementation', on Thu, 9 Jun 2005:
> see from the CENELEC website that EN61000-3-12 (line frequency >harmonics for equipment drawing >16 amps) has a DOP of November 2005, >and a DOW (DOPOCOSSS?) of 2008. However, it has not been published in >the OJEC yet. This may be clarified at the end of this month (June). > >1) Is it simply a matter of time before publication in the OJEC, or are >there special issues that could postpone official implementation? There could be special issues. >2) The IEC version is available, but the EN version might be hard to >get. Are there differences between the IEC and EN versions There are ALWAYS differences (e.g. clause 2 superseded by Annex ZA), but whether they are significant to you, only you can decide. There should be no difficulty in obtaining BS EN 61000-3-12, except funding the purchase, of course. (8-O( -- Regards, John Woodgate, OOO - Own Opinions Only. Deadlines are 90% of deadliness. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
