Hi Gary, I have no big experience in EMC but in my opinion: If you selected 61326 for your device then you can test 61000-4-3 to 3V/m (Table 1).
Regards Piotr Galka From: "Kozinski, Gary (GE - Infrastructure)" <[email protected]> To: <[email protected]> Sent: Tuesday, May 31, 2005 10:34 PM Subject: EN 61326 Deviation > Table 2 of EN 61326-1:1997 states if you cannot meet Criteria A, you can fall back on Criteria B or C provided that both the (product) specification and test report highlight such deviation for the relevant combination of function and test. > > Given Industrial data logger, 61000-4-3 requires 10v/m, the product at some frequencies fails to collect and/or looses data. > > Question: If the deviation is written into the DoC which is included in the product manual that includes product specifications; then, can you say the deviation is stated? > > OR, must the deviation be clearly stated in product specifications (Such as on data sheets and/or within product manuals)? > > Thanks for your opinions. > > Gary > This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
